Since Snappy is a 2-part cleaner there is an acid and a base, that means that they will neutralize one another if the brushes are mixed or the pad not cleaned. If you use a 3M pad, make sure you rinse it before using the brightener. If you used the brushes then you now use the color matched brush and do the same thing. Keep all those surrounding areas wet and free from possible run off. When the wood becomes black and tarry-like, let it sit on there for just a couple of minutes while you rinse out your bucket and do exactly the same thing for the number 2 formula, the same dilution. I prefer to clean in a more circular motion as opposed to back and forth, it is easier on the soft particles of the wood called chafing. Put your rubber gloves and goggles on and use either the matching supplied brush or a white 3M cleaning pad. I don’t suggest you use a gallon to pour from, too messy, use them to refill your empty quart bottles! If the teak is not too badly soiled you can dilute it with water if you are using a pail, I only recommend up to 4 to 1 dilution ratio with water. Now that your deck and surrounding areas are wet you can either pour some on by the quart bottle or, my favorite is, to pour it in a plastic pail. Putting some petroleum jelly on the aluminum will protect it from the chemicals used in Snappy Teak-Nu cleaners. Here is a little hint that can help if you are working in an area with aluminum in close proximity as in steps. Make sure your teak is wet before attempting to apply Snappy on it, I relate it to waxing a car on a sun filled 100 degree day in mid afternoon. Snappy Teak-Nu is used in ship yards professionally and by yachting enthusiasts all over the world. Each step is a powerful chemical and must be handled with care, but combined they neutralize each other and produce a perfectly safe and non-harmful solution. It is environmentally friendly and it will not damage your yacht if you follow the instructions. Snappy Teak-Nu is a powerful cleaner, it will remove all types of stains, spills and varnishes without damaging the wood. You can then choose to let it naturally turn grey with time and repeat the cleaning process at regular intervals or you can treat it with a sealer or an oil for a longer lasting protection. After applying the product and following the necessary steps described here, your deck will look like the day your yacht came out of the factory. Snappy Teak-Nu is the easy two step cleaning process that will transform your weathered teak deck to that brand new golden look without the need for expensive, time consuming and destructive sanding.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |